This complete power steering system for a Small Block Chevy consists of:
- pump
- v-groove pulley
- pump bracket(w/hardware)
- heavy duty reservoir with a non-vented cap
- your choice of 24", 48" or 72" 5/8" hose from pump to reservoir additional cost for the 48" or 72" hose)
- your choice of 32", 48", and 72" 3/8" hose from steering gear box to reservoir (additional cost for the 48" or 72" hose)
- 28 or 36" 3/8" pressure hose depending on your application.
- one set of gear box fittings (additional cost for extra fittings)
Hardware consists of:
- two 5/16" bolts with a square nut
- two 3/8" hex bolts
- two 3/8" hose clamps
- two 5/8" hose clamps
- three spacers (if applicable)
The only thing you provide is a belt, fluid, and make a reservoir bracket
PLEASE READ:
IF YOU HAVE A SHORT WATER PUMP AND AN ENGINE PROTECTOR WITH A FRONT PLATE THAT IS 1/4" TO 1/2", YOU WILL RECEIVE A WATER PUMP MOUNTED BRACKET WITH YOUR SETUP.
A SHORT WATER PUMP IS LESS THAN 1/16 OF AN INCH FROM THE TIMING CHAIN COVER.
A LONG WATER PUMP IS MORE THAN 3/8 OF AN INCH AWAY FROM THE TIMING COVER.
