This complete power steering system for a Small Block Chevy consists of:
- pump with reservoir mounted.
- v-groove pulley
- pump bracket(w/hardware)
- your choice of 32", 48", and 72" 3/8" hose from steering gear box to reservoir (additional cost for the 48" or 72" hose)
- 21" 3/8" pressure hose.
- one set of gear box fittings (additional cost for extra fittings)
Hardware consists of:
- two 5/16" bolts with two serrated nuts
- two 3/8" hex bolts
- two 3/8" hose clamps
- two spacers (if applicable)
The only thing you provide is a belt and fluid.
PLEASE READ:
IF YOU HAVE A SHORT WATER PUMP AND AN ENGINE PROTECTOR WITH A FRONT PLATE THAT IS 1/4" TO 1/2", YOU WILL RECEIVE A WATER PUMP MOUNTED BRACKET WITH YOUR SETUP.
A SHORT WATER PUMP IS LESS THAN 1/16 OF AN INCH FROM THE TIMING CHAIN COVER.
A LONG WATER PUMP IS MORE THAN 3/8 OF AN INCH AWAY FROM THE TIMING COVER.
IF YOU CHOOSE THE 03-10 GEAR BOX FITTING AS YOUR PRIMARY FITTING, YOU WILL RECIEVE A 3-4" LONGER PRESSURE LINE. IF THIS NOT YOUR PRIMARY FITTING YOU WILL NEED THE 8" EXTENTION TO REACH THE RACK, THIS CAN BE PURCHASED WITHIN THE LISTING.
IF YOU HAVE ANY QUESTIONS PLEASE CALL BEFORE YOU ORDER 217-621-6303
